How to Order Tungsten Alloy Bucking Bar
1.Spec.
AMS-T-21014:
| AMS-T-21014 | Class 1 | Class 1 | Class 2 | Class 2 | |
| Composition(%) | 90W7Ni3Fe | 91W6Ni3Fe | 92W5Ni3Fe | 93W4Ni3Fe | order |
| Density(g/cm3) | 17.1+/-0.15 | 17.25+/-0.15 | 17.5+/-0.15 | 17.6+/-0.15 | order |
| Tensile Strength(MPa) | 900~1000 | 900~1000 | 900~1100 | 900~1100 | order |
| Elongation (%) | 18~29 | 17~27 | 16~26 | 16~24 | order |
| Hardness(HRC) | 24~28 | 25~29 | 25~29 | 26~30 | order |
| AMS-T-21014 | Class 3 | Class 3 | Class 4 | |
| Composition(%) | 95W3Ni2Fe | 96W3Ni1Fe | 97W2Ni1Fe | order |
| Density(g/cm3) | 18.1+/-0.15 | 18.3+/-0.15 | 18.5+/-0.15 | order |
| Tensile Strength(MPa) | 920~1100 | 920~1100 | 920~1100 | order |
| Elongation (%) | 10~22 | 8~20 | 6~13 | order |
| Hardness(HRC) | 27~32 | 28~34 | 28~36 | order |
2. Bucking Bar Catalogue
 |
 |
 |
|||
| DWG. No. | 061304 | DWG. No. | 071431 | DWG. No. | 071432 |
| Size (inch) | 4×1×0.63 | Size (inch) | 2.5×1.5×0.75 | Size (inch) | 2.5×1.5×0.75 |
| Appr.W.(kgs) | 0.75 | Appr. W. (kgs) | 0.70 | Appr. W. (kgs) | 0.71 |
 |
 |
 |
|||
| DWG. No. | 071433 | DWG. No. | 071440 | DWG. No. | 071472 |
| Size (inch) | 2.5×1.5×1.5 | Size (inch) | 3×1.6×0.5 | Size (inch) | 2×1×1 |
| Appr. W. (kgs) | 1.00 | Appr. W. (kgs) | 0.70 | Appr. W. (kgs) | 0.65 |
 |
 |
 |
|||
| DWG. No. | 071469 | DWG. No. | 071469b | DWG. No. | 081479 |
| Size (inch) | 4×0.9×1.8 | Size (inch) | 4×0.9×1.8 | Size (inch) | 4×1×2 |
| Appr. W. (kgs) | 1.40 | Appr. W. (kgs) | 1.40 | Appr. W. (kgs) | 1.00 |
 |
 |
 |
|||
| DWG. No. | 081503 | DWG. No. | 081480 | DWG. No. | 081481 |
| Size (inch) | 2×1.5×0.5 | Size (inch) | 3.5×1.5×1 | Size (inch) | 3.5×1.5×0.4 |
| Appr. W. (kgs) | 0.5 | Appr. W. (kgs) | 1.50 | Appr. W. (kgs) | 0.60 |
 |
 |
|
|||
| DWG. No. | 091664 | DWG. No. | 091665 | DWG. No. | 071439 |
| Size (inch) | 3.8×1.2×0.6 | Size (inch) | 3.3×1.2×0.5 | Size (inch) | 3×2×1.4 |
| Appr. W. (kgs) | 0.66 | Appr. W. (kgs) | 0.50 | Appr. W. (kgs) | 2.0 |
3. Shipment/Freight
Price term is usually based on FOB, CNF, CIF, any other requirement should be negotiated.
Express is usually DHL, TNT, FedEx, any other requirement should be negotiated.
Shipment by express means shipping door to door, shipment by air means shipping airport to airport, shipment by ocean means shipping sea port to sea port.
4. Bank Fee
Bank Fee will be charged by the intermediate foreign bank as foreign bank fee, usually Chinatungsten apply to the following:
| Total Amount (USD) | Bank Fee (USD) |
| <5000.00 | 30.00 |
| ≧5000.00 | Born by Chinatungsten |
5. Packing
Packing usually is carton, plywood box, iron box, which will be used depending on the total net weight of products. If there are any other requirements for packing, please do not hesitate to contact.
Related Products:
Tungsten bucking bar are placed behind work surfaces to provide a backing member in applying impact fasteners and including intermitted tool head and handle parts with a low-recoil impact-absorbing spacer provided there between to take shock loads in compression and shear. A rivet gun is a type of tool used to drive rivets; nearly all rivet guns are pneumatically powered.
Tungsten fishing sinkers are weight used in conjunction with a fishing lure or hook to increase its rate of sink, anchoring ability, and casting distance.
Nowadays, a popular approach to weighting down soft plastics is the advent of small tungsten nail sinkers to add small amounts of weight internally to soft plastic lures.
Tungsten alloy cylinder could be manufactured as the parts of military defense, extrusion die, some counterweights, such as yacht counterweights, vehicle counterweights, airplane counterweights, helicopter counterweights, boat counterweights, tank counterweights, etc.